Fire tube replacement and pressure vessel repair, done in the shop or in the field, so your equipment gets back to work.
Fire tube replacement and pressure vessel repair for oil & gas and petrochemical operators. Treaters, line heaters, separators, and the vessels a facility can’t run without.
Fire tubes take a beating. Heat, scale, and corrosion wear them down until a hot spot or a failed inspection takes the vessel offline, and every day it sits is production you don’t get back.
We work from your inspection findings. Once the inspector has made the call, our crew scopes the repair, sets the procedure, and gets to work, either in our Fairview shop or on your site.
Pressure work is done to ABSA requirements by CWB-certified welders, then pressure tested before anything goes back in service.
And because coating and scanning happen under the same roof, a vessel that needs a new fire tube and a fresh internal coating gets both from one crew, on one schedule.
Pull and replace worn or failed fire tubes in treaters and heaters.
02
Repairs to shells, nozzles, and internals, done to ABSA requirements.
03
Repairs in our shop or on site, depending on what the job needs.
04
Vessel interiors blasted and recoated while they’re already open.
05
Pressure testing and QC records handed over at close-out.
Start from the inspection report and confirm the scope of repair.
Set the procedure, materials, and schedule to get you back online.
Fire tube swaps, weld repairs, and recoating, done to code.
Pressure test and hand over the paperwork before we call it done.
Related Services
