Internal and external coating, and sandblasting. NACE-certified and applied to spec, in the shop or in the field.
Internal and external coating, and abrasive blasting for oil & gas and petrochemical operators. The finish protects the asset, but only if the surface underneath it is prepped to spec.
Every job starts with surface prep. Our crews blast to the profile the coating system calls for, then inspect it before the first coat goes on, because most coating failures start with prep that got rushed.
We run a NACE-certified program, with a NACE Level 1 inspector and a certified applicator on the team. Application, cure, and film thickness get checked and documented, not eyeballed.
Work happens in our Fairview shop or in the field, whichever the asset and the schedule call for. Skids and modules get coated before they ship; pipeline and facility work gets coated on site.
Internal linings and external protective coatings backed by the inspection paperwork your operator needs to close out the job.
Sandblasting to the surface profile your coating system requires.
02
Protective linings applied and inspected for pipe and vessels.
03
Corrosion protection for skids and facility steel.
04
Application, cure, and thickness verified by a certified inspector.
05
DFT readings and QC records handed over at close-out.
Confirm the coating system and surface prep the asset needs.
Abrasive blast to profile and inspect before coating.
Apply to spec, with thickness and cure checked throughout.
NACE sign-off and QC records before we call it done.
Related Services
Tell us the asset and the spec, and we’ll handle prep to sign-off.
